Zurück
Vor
 
 
HI983307 EC Monitor up to 9.99 mS with LED-Alarm and Inline EC PRONTO
HI983307 EC Monitor up to 9.99 mS with LED-Alarm and Inline EC PRONTO
THB 4,700.00 * Prices plus VAT plus shipping costs
Star Rating (0)
 
 
Amount:
 
 
 
 

Product information "HI983307 EC Monitor up to 9.99 mS with LED-Alarm and Inline EC PRONTO"

  • Water resistant
  • Continuous EC monitoring
  • Visual LED alarms

 

This water resistant conductivity meter is the result of customer requests for accurate, affordable process monitoring with low maintenance.

HI 983307 -02 is supplied with a direct 2-pin probe and 2 m (6.6') cable with a ½" thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C (41 to 122°F) with a β of 2% per degree.

In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. This meter can be installed anywhere quickly and easily with the casings molded eye. The casing has been specially designed to sit out of the way and will not roll off a table. The 12 VDC power supply allows continuous monitoring over extended periods of time. 

Order Information:   and HI 983307-02 (230V) are supplied with HI 7632/2 EC/TDS probe, calibration screwdriver, 12 VDC adapter and instructions.

Specification :

Range   0.00 to 9.99 mS/cm
Resolution   0.01 mS/cm
Accuracy   ±2% F.S.
Calibration   manual, 1 point through trimmer
Calibration Solution   HI 70039
Temperature Compensation   automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C
Setpoint   0.70 to 3.50 mS/cm
Alarm   red LED blinks when measured value differs from set point more than ±0.20 mS/cm
Probe   HI 7632/2 with 2 m (6.6') cable and ½" thread (included)
Power Supply   12 Vdc power adapter (included)
Environment   0 to 50°C (32 to 122°F); RH max 100%
Dimensions   86 x 110 x 43 mm (3.4 x 4.3 x 1.7")
Weight   215 g (7.6 oz.)
 

More Information about "HI983307 EC Monitor up to 9.99 mS with LED-Alarm and Inline EC PRONTO"

Other products from HANNA Instruments Inc.
 

Customer evaluation "HI983307 EC Monitor up to 9.99 mS with LED-Alarm and Inline EC PRONTO"

 
Evaluations will be activated after verification

Write an evaluation

 
 
 
 
 
 
 

The fields marked with * are required.

 
 
 
 
 

Viewed