Zurück
Vor
 
 
HI8614N pH - Transmitter with 4 to 20 mA Ouput
HI8614N pH - Transmitter with 4 to 20 mA Ouput
THB 19,300.00 * Prices plus VAT plus shipping costs
Star Rating (0)
 
 
Amount:
 
 
 
 

Product information "HI8614N pH - Transmitter with 4 to 20 mA Ouput"

Water resistant

  • Loop powered
  • Automatic Temperature Compensation

 

The HI 8614N is a water-resistant pH transmitter is designed to be used with a standard high impedance pH probe with BNC connector. The signal is then processed by a special high-impedance amplifier, which transmits an output current directly proportional to the input signal but independent of changes in load or cable capacitance.

Calibration is performed by the adjustment of two independent trimmers — slope and offset.

Temperature compensation is performed by the transmitter's ATC (Automatic Temperature Compensation) circuitry when measurements are taken with a temperature probe attached; if ATC is not required, it is also possible to substitute a fixed resistor for the temperature probe. The transmitter can be connected to HANNA controller
HI 8510, HI 8710 or HI 8711, recorders, computers or any data monitoring device that accepts 4 to 20 mA input.

 

Order Information:
HI 8614N is supplied with instructions.

Product Manual:

HI 8614 (Process Instrumentation)

Specification :

Range   0.00 to 14.00 pH; 4–20 mA
Accuracy @ 20°C   ±0.02 pH; ±0.02 mA
Calibration   offset: ±2 pH; ±2.2 mA; slope: 86 to 116%; ±0.5 mA
Temperature
Compensation
  fixed or automatic from 0 to 100°C (32 to 212°F) with HI 76608 probe
Input Impedance   1012 Ohm
Recorder Output   4-20 mA (isolated)
Protection   IP65
Power Supply   18-30 VDC
Load   max 500 Ohm
Environment   0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions   165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’)
Weight   1 kg (2.2 lb.)

 

 

More Information about "HI8614N pH - Transmitter with 4 to 20 mA Ouput"

Other products from HANNA Instruments Inc.
 
 

Available downloads:

Downloads Brochures

Customer evaluation "HI8614N pH - Transmitter with 4 to 20 mA Ouput"

 
Evaluations will be activated after verification

Write an evaluation

 
 
 
 
 
 
 

The fields marked with * are required.

 
 
 
 
 

Viewed